If you want to achieve a sparkling clean bathroom, knowing how to clean your glass shower doors is crucial. Due to water droplets, shower products, and body soil, glass shower doors can become dirty frequently, and even permanently etched if not properly cleaned. In this article, you will learn how to clean your glass shower doors using simple cleaning solutions made with household items or a soap scum remover for a clean and shiny finish.
Follow these steps to ensure your glass shower doors remain clean and clear. With the right techniques and cleaning solutions, you can easily remove soap scum and other buildup, leaving your glass shower doors looking brand new.
How Often to Clean Glass Shower Doors
Cleaning your glass shower doors is an essential part of maintaining a clean and hygienic bathroom. It is recommended that you clean your shower doors after every use, or at least once a week if daily cleaning is not manageable. Neglecting to clean your shower doors regularly can lead to the buildup of grime, soap scum, and hard water stains, which can be difficult to remove.
To Clean With Lemon Juice
Lemon juice is a natural and effective way to clean your shower doors without using harsh chemicals. To clean with lemon juice, you will need a spray bottle, lemon juice, distilled water, dishwashing soap, a non-abrasive sponge or squeegee, and microfiber towels. Mix equal parts lemon juice and distilled water in a spray bottle, add a few drops of dishwashing soap, and shake well. Spray the solution onto your shower doors and wipe clean with a non-abrasive sponge or squeegee. Use a microfiber towel to dry the doors and prevent water spots.
To Clean Shower Door Tracks
Shower door tracks can accumulate dirt, grime, and soap scum over time. To clean your shower door tracks, you will need a paper towel or old washcloth, distilled white vinegar, a toothbrush, distilled water, and a microfiber towel. Start by wiping the tracks with a paper towel or old washcloth to remove any loose dirt or debris. Mix equal parts distilled white vinegar and distilled water in a spray bottle and spray the solution onto the tracks. Use a toothbrush to scrub the tracks and remove any stubborn buildup. Wipe clean with a microfiber towel.
To Remove Water Stains
Hard water stains can be tough to remove from glass shower doors. To remove water stains, you will need half a lemon, baking soda, microfiber towels, distilled white vinegar, a microwaveable glass bowl, dishwashing soap, a spray bottle, non-abrasive sponge, non-sudsing ammonia, and distilled water. Squeeze the lemon onto the stained areas and sprinkle baking soda over the lemon juice. Let the mixture sit for a few minutes and then scrub the stains with a non-abrasive sponge. Rinse with distilled water and dry with a microfiber towel. For stubborn stains, mix equal parts distilled white vinegar and non-sudsing ammonia in a microwaveable glass bowl and heat for 30 seconds. Spray the solution onto the stains and let it sit for a few minutes before scrubbing with a non-abrasive sponge. Rinse with distilled water and dry with a microfiber towel.
How to Clean Glass Shower Doors With Vinegar
Glass shower doors can be a pain to clean, but with the right solution, it can be a breeze. Here are the steps to clean your glass shower doors with vinegar:
Step 1: Mix a Cleaning Solution
To make the cleaning solution, mix two parts of distilled white vinegar with two parts of distilled water in a spray bottle. Add 1/4 teaspoon of dishwashing liquid to help the solution cling to the glass.
Step 2: Spray the Glass
Starting at the top of the glass door, liberally spray the solution onto the glass. Let the solution work for at least five minutes to break down the soap scum. This vinegar solution can be used as a daily cleanser. If you use it this way after every shower while the glass is wet, there is no need to wait.
Step 3: Wipe the Glass
Starting at the top, use a non-abrasive sponge or squeegee to wipe the glass down. If the vinegar solution has dried, add a bit more.
Step 4: Rinse and Dry
If using a sponge for cleaning, rinse the glass with water, then dry it with a lint-free microfiber towel. If you are cleaning with a squeegee, use the towel to remove any smudges or smears.
It’s important to note that distilled white vinegar contains acetic acid that will cut through soap scum, but it can damage unsealed natural stone. Do not use this method on showers with stone. With these easy steps, you can have clean and shiny glass shower doors in no time!
How to Clean Glass Shower Doors With Lemon Juice
Glass shower doors can easily accumulate soap scum, hard water stains, and grime. Cleaning them regularly ensures that they remain sparkling clean. Lemon juice is a mild and effective alternative to vinegar for cleaning glass shower doors. Here’s how you can use lemon juice to clean your shower doors:
Step 1: Mix a Cleaning Solution
To make the cleaning solution, mix equal parts of lemon juice and distilled water in a spray bottle. Add 1/4 teaspoon of dishwashing liquid to the solution. Shake the bottle well to mix the ingredients.
Step 2: Spray the Glass
Starting at the top of the glass door, spray the surface with the cleaning solution. Allow the solution to sit on the glass for about five minutes. The citric acid in the lemon juice will help break down the soap scum and hard water stains.
Step 3: Wipe the Glass
Using a non-abrasive sponge or squeegee, wipe the glass from the top down. Wiping in this direction helps avoid smudging and streaks. The dishwashing liquid in the solution will help remove any remaining grime.
Step 4: Rinse and Dry
Rinse the glass with water to remove any remaining cleaning solution. If you used a squeegee, rinsing may not be necessary. Use a microfiber towel to dry the glass and remove any streaks or smudges.
It’s important to note that while lemon juice is milder than vinegar, it should not be used on natural stone showers. With these simple steps, you can easily keep your glass shower doors clean and sparkling.
Removing Water Stains From Glass Shower Doors
Water stains on your glass shower door can be stubborn and unsightly. Fortunately, there are several effective cleaning strategies you can use to remove them. Here are some methods you can try:
- Lemon: Cut a lemon in half and dip the cut side into baking soda. Gently scrub the stained areas of the glass with the lemon. Rinse the glass well and dry it with a lint-free cloth or towel.
- Vinegar: Heat undiluted distilled white vinegar in a microwaveable bowl until very warm but not boiling. Add 1/4 teaspoon of dishwashing liquid to the vinegar and pour the mixture into a spray bottle. Alternatively, you can use a sponge to apply the vinegar to the glass. Allow the vinegar to work for five to 10 minutes before dipping a sponge in dry baking soda and gently scrubbing any stained areas. There will be some fizzing, but it will quickly dissipate. Rinse the glass well and dry it with a lint-free cloth.
- Ammonia: Add 1 tablespoon of non-sudsing household ammonia to 1 quart of warm distilled water in a spray bottle. Spray the water stains and wait five minutes. Then, scrub the area with a non-abrasive sponge. Rinse the glass with water and dry it with a microfiber cloth.
It’s worth noting that ammonia is a common ingredient in commercial shower and bathroom cleaners. However, it has a very strong odor and should not be combined with other cleaning products. If you choose to use ammonia, make sure to open a window and have proper ventilation.
How to Clean Glass Shower Door Tracks With Vinegar
Shower door tracks can easily accumulate soap scum and dirt, which can lead to mold, algae, and soap scum buildup. Follow these easy steps to effectively clean your shower door tracks with vinegar.
Step 1: Plug the Drainage Hole
Locate the drainage hole or slit in the shower door track and plug it with an old washcloth or paper towel. This will prevent the vinegar from draining out and allow it to work effectively.
Step 2: Fill Track With Vinegar
Pour undiluted distilled white vinegar into the track until it is completely filled. Let it sit and work for at least four hours or overnight. Vinegar is a natural and effective cleaning agent that will break down the soap scum and dirt.
Step 3: Scrub the Track
Once the vinegar has been allowed to break down the soap scum, unplug the drainage holes to drain the vinegar. Use a toothbrush to scrub away the soap scum and dirt. The toothbrush bristles will effectively remove any remaining buildup.
Step 4: Rinse and Dry
Rinse the shower door track with distilled water. Scrub again (if needed) with a toothbrush dipped in vinegar. Rinse and dry with a microfiber towel. This will ensure that all of the vinegar and soap scum have been removed, leaving your shower door tracks clean and sparkling.
By following these simple steps, you can easily clean your glass shower door tracks with vinegar, without the need for harsh chemicals or expensive cleaning products.
How to Keep Your Glass Shower Doors Clean Longer
To keep your glass shower doors clean, consider implementing these tips:
- After every use, use a squeegee or microfiber towel to wipe your glass shower doors dry, even if you don’t use a cleaner. This helps to prevent water spots and soap scum buildup.
- Mix a cleaning solution in a spray bottle and keep it in the shower for daily use. Vinegar or lemon solutions work well for this purpose.
- To reduce soap scum, switch to liquid body wash instead of bar soap. This will help to prevent soap scum buildup on your shower doors.
- If you live in an area with hard water, consider installing a water-softening system in your home. This can help to prevent mineral buildup on your glass shower doors.
By following these tips, you can keep your glass shower doors looking clean and clear for longer periods of time.
